Home > Speaker Mounts

AM-41 Side Clamping Bookshelf Speaker Wall Mount - Black

MODEL # AM41/B
review 0 Review(s)
0
The AM41 Side clamping bookshelf speaker wall mount has been designed for traditional wood cabinet bookshelf style speakers that were not provide with a standard mounting point by the manufacturer. Using a solid platform with side clamps, the AM41 offers a 90 degree swivel, 10 degree tilt and can support a speaker 5.5 to 12" wide, up to 13 deep and a maximum of 50 lbs. Side clamps have specialized non-marking, non-slip isolation pads to provide a safe and secure contact point for the speaker. The AM40 comes with a decorative cover for the wall plate to conceal mounting screws for a clean installation. All mounting hardware is included and sold as a pair for mounting 2 speakers. The AM41 is available in black.
Price:
$99.99
Quantity
Review this item
Questions about this item? Ask here. Questions about this item? Ask here. (See 9 Questions)
AM-41 Side Clamping Bookshelf Speaker Wall Mount - Black

BACK-ORDERED!

THIS ITEM IS CURRENTLY ON BACK-ORDER AND WILL BE BACK  IN STOCK MAY 15, 2017! PLEASE ADD YOUR EMAIL TO THE WAITING LIST AND WE WILL EMAIL YOU WHEN PRE-ORDERS ARE AVAILABLE FOR THIS ITEM.

The AM-41 Side Clamping Bookshelf Speaker Mount is a stylish wall mount that can help you get the best sound out of a bookshelf-style speaker when mounting them to a wall. Recommended for speaker owners who did not receive a factory-supplied mount, have built in amplifiers such as studio monitors or have speakers that do not have a mounting attachment point on the back of the speaker. This side clamping bookshelf speaker wall mount can be tilted down up to 10 degrees and can be swiveled 90 degrees left or right. Side clamping design works well with oversized or curved front speakers and can accommodate a speaker that measures 5.5 to 12" wide. The Provided non-marking and non-slip isolation pads hold the speaker securely without marring the finish and additional security screws are provided for a more permanent installation if desired. Additional features include wire management channel cutouts on the wall plate allowing speaker wire to be run directly behind the mount, even when mounted to a wood stud for a clean, professional appearance. Installation times are greatly reduced thanks to the Keyhole Slotted mounting plate that allows for fast leveling and the ability to install the speaker onto the mount before attaching the mount to the wall. Large lag type bolts insure a strong solid connection to the wall and high weight handling up to 50 lbs. Constructed from high quality steel and competed in a smooth satin black powder coated finish for long life and durability. Each AM41 comes with a pair of wall mounts for mounting a Pair of speakers and a 5 year limited warranty.



Questions and Answers
Q: Hello, is there any way that I could get the dimensions of the base plate for the am-41 ? My speakers are not straight on the sides and they are 13 3/4 long and 9 3/4 at the widest ( they will have to be moved forward slightly and I am concerned about the holding ability of the clamp) so I want to try to incorporate my existing 4 bolt lugs on the bottom of my speaker which are laid out at 11 x 5 3/4. Also which would be better for me , the 40 or the 41 ? Thank you
Asked by:  - 8/20/2014 (Submit an answer)
A: The base plate for the AM41 is the same as the AM40. You can find a tech sheet for the AM40/41 here, http://www.pinpointmounts.com/SpeakerMounts/am40techsheet.pdf

The clamps need a flat side for best installation and are aprox. 3" long. If the speaker tapers from front to back you may be able to secure the speaker without modifications.

If this does not provide all information need, we will be happy to do more research for you.
Was this answer helpful?   3 of 4 Customer(s) found this Answer helpful.
Answer provided by:  
Q: Hello, regarding the AM-41 speaker mount I need to know if the side to side swivel capability is 90 degrees total from side to side or is it 90 right or 90 left for a total of 180 degrees range? I need to mount a pair of M&K S-125 on left and right side walls (can't do ceiling or back wall). Thank you. Giorgio Pranzo
Asked by:  - 9/23/2014 (Submit an answer)
A: These mounts will rotate left or right 90 Degrees from center for a total of 180 degrees. Depending on the width of the speaker, they may rotate more than 90 degrees, if the speaker is less than 11" wide.

For most installations where the speakers need to be turned in, the AM41 should provide the needed angle adjustments.


Was this answer helpful?   3 of 3 Customer(s) found this Answer helpful.
Answer provided by:  
Q: I need to wall mount a set of pioneer elite bookshelf speakers, and I am curious if this mount will work. The speakers are Pioneer SP-EBS73-LR, and the speaker dimensions are: 7.4" width X 15.7" height X 9.4" depth. The speaker weight is 15.8 lbs. Will this mount work? Thank you!
Asked by:  - 1/19/2015 (Submit an answer)
A: As long as your speaker is between 5.5" and 12" wide and have flat sides this mount will work for you. Looking at the measurements of the Pioneer speaker, you will have no problem using this mount.

Was this answer helpful?   1 of 1 Customer(s) found this Answer helpful.
Answer provided by:  
Q: Hi, I have a pair of JBL ES-20 bookshelf speakers, and though they have straight sides, the speaker is not square, it tapers a fair bit from front to back. Will the clamps still work on my speakers? I can't tell from the pictures or description if the clamps pivot or if they require parallel sides to clamp.
Asked by:  - 1/20/2015 (Submit an answer)
A: Flat sides are the best for this mount, but if there is at least 3" of flat side that the clamps can grip you can use this mount. The clamps do not pivot so the flatter the speaker the better.
Was this answer helpful?   1 of 3 Customer(s) found this Answer helpful.
Answer provided by:  
Q: Is the AM41 also available in White? Online I only see brochure for the AM40, can you send me a brochure for the AM41? Thank you.
Asked by:  - 5/13/2015 (Submit an answer)
A: The AM41 is only available in Black and is the updated version of the AM40. More information on the AM41 can be found under the Manual & Downloads tab of the product page. We have emailed you the information sheet as well.

Thank you

Pinpoint Mounts
Was this answer helpful?   1 of 1 Customer(s) found this Answer helpful.
Answer provided by:  
Q: I want to mount a pair of JBL ES20CH speakers using this mount. The speaker is not square as it is wider at the front than the back. Will the side clamps properly clamp this speaker?
Asked by:  - 10/26/2014 (Submit an answer)
A: As long as you can get 3" of flat side of the speaker for the clamps to secure to, you can use this mount with the speakers. Most speakers that taper from front to back should have enough flat surface at the front of the speaker to allow proper clamping. We do suggest testing prior to full installation.

Was this answer helpful?   0 of 1 Customer(s) found this Answer helpful.
Answer provided by:  
Q: I have been using this with a pair of Polk Monitor 40s for the past 3 years and they have done the job amazingly well! However, I just upgraded to a dolby Atmos receiver. I need to know if these will hold if mounted into a stud horizontally instead of vertically so I can aim the same speakers pointed down instead of vertically. If so, is there a decreased weight limit? Thanks in advance for any answers you may be able to provide.
Asked by:  - 5/24/2015 (Submit an answer)
A: It is possible to mount the speaker as your are suggesting, but we would ask you to contact customer support so that we can get more details of your installation to insure the mount can be used safely.
Was this answer helpful?   0 of 0 Customer(s) found this Answer helpful.
Answer provided by:  
Q: The wire hole is aligned with the wall stud. How I supposed to get the speaker cable thru that hole? Did I miss something there?
Asked by:  - 6/6/2015 (Submit an answer)
A: When mounting directly onto a wood stud, the side cutouts of the AM41 wall plate should allow the wire to pass next to the stud and behind the speaker. You will not be able to use the center hole in the metal wall plate unless the wire pathway is made in the wood stud prior to installation.

The wire cutouts on the AM41 wall plate are the curved areas on the sides, top and bottom of the plate that mounts on the wall. In some installations it may require cutting out areas of the drywall to allow the wire to pass.


Was this answer helpful?   0 of 0 Customer(s) found this Answer helpful.
Answer provided by:  
Q: What mount works with Sonos Play 5 Gen2? I would prefer Horizontal Mounting. Does AM-41 Side Clamping Bookshelf Speaker Wall Mount work? Will you make something for Sonos Play 5 Gen2?
Asked by:  - 11/6/2015 (Submit an answer)
A: We currently do not have a mount that works with the Sonos Play 5 (both gen 1 & 2) but will be offering a mount design similar to our AM41 in 2016. Please contact customer service for more information.

Was this answer helpful?   0 of 0 Customer(s) found this Answer helpful.
Answer provided by:  
Related Items
AB506 Universal Speaker Mount  with Tilt & Swivel(6 Pack) Black
AB506 Universal Speaker Mount with Tilt & Swivel(6 Pack) Black
Average Rating
$29.99
AM41C Side Clamping Bookshelf Speaker Ceiling Mount with Tilt & Swivel (Pair) - Black
AM41C Side Clamping Bookshelf Speaker Ceiling Mount with Tilt & Swivel (Pair) - Black
Average Rating
$149.99
AM41L Side Clamping Bookshelf Speaker Wall Mount with Tilt & Swivel - Long Arm (Pair)- Black
AM41L Side Clamping Bookshelf Speaker Wall Mount with Tilt & Swivel - Long Arm (Pair)- Black
Average Rating
$109.99
ACC-01 Thread Adapter for 3/8-16 threaded inserts.
ACC-01 Thread Adapter for 3/8-16 threaded inserts.
Average Rating
$2.00
AB502-Black Universal Speaker Mount (Pair) Black
AB502-Black Universal Speaker Mount (Pair) Black
Average Rating
$9.99
AM-21 Universal Wall & Ceiling Speaker Mount - Black
AM-21 Universal Wall & Ceiling Speaker Mount - Black
Average Rating
$34.99
Recently Viewed Items