Home > Speaker Mounts

AM-40 Side Clamping Bookshelf Speaker Wall Mount - Black

MODEL # AM40/B
review 6 Review(s)
4
The AM40 side clamping bookshelf speaker wall mount has been designed for traditional wood cabinet bookshelf style speakers that were not provide with a standard mounting point by the manufacturer. Using a solid platform with side clamps, the AM40 offers a 90 degree swivel, 7 degree tilt and can support a speaker 5.5 to 11.5 wide, up to 13 deep and a maximum of 50 lbs. Side clamps have specialized non-marking, non-slip isolation pads to provide a safe and secure contact point for the speaker. The AM40 comes with a decorative cover for the wall plate to conceal mounting screws for a clean installation. All mounting hardware is included and sold as a pair for mounting 2 speakers. The AM40 is available in black.
Price:
$89.99
Quantity
Write a Review
Questions about this item? Ask here. Questions about this item? Ask here. (See 4 Questions)
AM-40 Side Clamping Bookshelf Speaker Wall Mount - Black

Small to mid-sized bookshelf speakers are great additions to your home. You can easily incorporate these into your rooms and can deliver better sounds. But to complete a project involve these kinds of speakers; it is important that you use the right tools and accessories to set up these kinds of speakers. At Pinpoint Mounts, we offer you speaker mounting solutions that can help you complete your project inside your home or at the office.



One reliable mount that we offer is the AM-40 Side Clamping Bookshelf Speaker Wall Mount – Black, a stylish wall mount available in black that can help you get the best out of a bookshelf-style speaker. This is recommended for speaker owners who did not receive a factory-supplied mount or would like to get another new mount for their DIY installation project. This side clamping bookshelf speaker wall mount can be tilted to 7 degrees and can be swiveled for 90 degrees. Our AM-40 Side Clamping Bookshelf Speaker Wall Mounts can accommodate a speaker that measures 5.5 to 11.5 wide up to 13 inch deep, and a maximum of 50 lbs. The speaker will fit securely thanks to the addition of a non-marking and non-slip isolation pads, which means that the speaker will not slip or fall. The package comes complete with all the mounting screws required for installation purposes. A decorative cover is also made available to conceal the screws.

Get this speaker wall mount from this site and maximize your brand new bookshelf speaker. At Pinpoint Mounts, we carry a wide selection of speaker mounts, from speaker wall mounts to speaker ceiling mounts. So contact us now at 865-671-2020 or send us a message to learn more about our speaker mount solutions.



Customer Reviews View All Reviews
Rating Mounting for Wharfdale Diamond 10
 
The speaker mounts arrived last week and worked out very well. I was having trouble finding mounts that would fit the curved sides of Wharfdale Diamond 10 bookshelf speakers. I was looking for mounts that I could attach to the outside of a entertainment cabinet and have the speakers face out. There is nothing on the market that fit my needs except the AM-40’s. I will agree with many reviews that I read on-line that the large screws that come with the mounts are substandard, made from too soft a metal. I used other screws. Other than that the AM-40 are fantastic and look great.
  Reviewed by:   from Canada. on 3/17/2014
4/5
Rating peasant at large
 
Nice brackets. Used to hold Audio Engine speakers. Sturdy and works as advertised. Would use merchant again.
  Reviewed by:   from Maryland. on 11/29/2012
4/5
Rating AM-40 Side Clamping Mount
 
I was referred to Pinpoint via Boston Acoustics to use on four VR-M50's. I was a little hesitant to order online as A) I hadn't seen the product, and B) would it get here in time for the installation guys coming out who were doing other things to our room.The product arrived on the date promised and works great. It looks great and doesn't intrude on the aesthetics of the speakers. Thank you pinpoint for following through and making a nice product. Thanks again~
  Reviewed by:   from Seattle. on 12/25/2011
5/5
Rating
 
This is a rugged, versatile, solid product. Fits medium to large (11"X) bookshelf speakers and powered monitors. They handle the weight.
  Reviewed by:   from Sylmar CA. on 4/21/2011
5/5
Rating Owner, Big Dog Sound
 
Great mounting system. I used it with some Bowers & Wilkens CM1 speakers and the install turned out great. I think a valuable addition would be to have no-slip rubber pads for the bottom surface of the mount as well. I added my own and then also a strain relief/safety using aircraft cable on the back side to make sure it doesn't come down in an earthquake. Great Job!
  Reviewed by:   from San Jose, CA. on 12/14/2010
5/5
Questions and Answers
Q: Is the 50lb limit for one or two speakers? If I order one, is that one pair or one bracket; that's unclear.
Asked by:  - 2/13/2014 (Submit an answer)
A: The AM40 is sold as a Pair of brackets for mounting 2 Speakers. The weight handling limit of 50 lbs is per bracket so the maximum weight of a single speaker can not be over 50 lbs.
Was this answer helpful?   5 of 5 Customer(s) found this Answer helpful.
Answer provided by:  
Q: Can this item be mounted on a ceiling for the same use?
Asked by:  - 2/24/2014 (Submit an answer)
A: No, the AM40 can only be used as a wall mount due to the design of the mounting arm. Mounting the AM40 on the ceiling will not provide any support for the speaker. We do not recommend using this in a ceiling application.

Was this answer helpful?   2 of 2 Customer(s) found this Answer helpful.
Answer provided by:  
Q: I have some 12kg bookshelf speakers, with a base 8.3in wide x 13.6 in deep. Will the AM-40 work, or is there another similar model?
Asked by:  - 3/25/2014 (Submit an answer)
A: From the information provided, The AM40 will work with no problems, even though your speaker is slightly deeper than the 13" recommended.


Was this answer helpful?   0 of 0 Customer(s) found this Answer helpful.
Answer provided by:  
Q: Is there a way to conceal the speaker wires or will I need to install a wall plate for the speaker wires next to this stand?
Asked by:  - 4/1/2014 (Submit an answer)
A: The AM40 is designed to be mounted to a wall stud so wire management is not possible. We recommend running the wire out of the wall next to the wall plate of the AM40 to limit the amount of wire exposed.
Depending on the depth of the speaker, the majority of installations will not have much wire exposed and will most likely be hidden from view by the speaker itself.

Most common installations we have seen will have the wire terminate in an electrical box and terminal binding post plate. Other options is to use a cable cover plate.


Was this answer helpful?   0 of 0 Customer(s) found this Answer helpful.
Answer provided by:  
Related Items
AM-15 Center Channel Speaker Mount - White
AM-15 Center Channel Speaker Mount - White
Average Rating
$39.99
AB506 Universal Speaker Mount  with Tilt & Swivel(6 Pack) Black
AB506 Universal Speaker Mount with Tilt & Swivel(6 Pack) Black
Average Rating
$29.99
ACC-01 Thread Adapter for 3/8-16 threaded inserts.
ACC-01 Thread Adapter for 3/8-16 threaded inserts.
Average Rating
$2.00
AM-21 Universal Wall & Ceiling Speaker Mount - Black
AM-21 Universal Wall & Ceiling Speaker Mount - Black
Average Rating
$34.99
AM-25 Universal Speaker Wall Mount - White
AM-25 Universal Speaker Wall Mount - White
Average Rating
$29.99
AM-20 Universal Wall & Ceiling Speaker Mount - White
AM-20 Universal Wall & Ceiling Speaker Mount - White
Average Rating
$39.99
Recently Viewed Items